Most common
problems & fixes

Is your Zanussi ZRD 1845 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

No power to the appliance

No power at the socket, power cut, or blown fuse.

Check there is power at the socket, ensure there is not a power cut by checking household lights, and check the fuse.

Temperature in the fridge or freezer is too high

The thermostat control knob is set too low or the appliance is located in an unsuitable position.

Adjust the thermostat control knob and ensure the appliance is in a suitable position.

Compressor runs continuously

Large quantities of food have been placed in the cabinet, the door has been opened too frequently, or air ventilation is obstructed.

Ensure air ventilation is not obstructed and avoid frequent door opening.

Temperature in the fridge or freezer is too low

The thermostat control knob is set too cold.

Adjust the thermostat control knob to a warmer position.

View all problems & fixes

Quick setup

Follow these easy steps to get your Zanussi ZRD 1845 Refrigerator up and running in no time.

1

Transportation and Unpacking

The appliance and the interior fittings are protected for transport. Remove all packaging and any adhesive tape. Ensure that the power plug has not been squashed or damaged during transit.

2

Cleaning Before First Use

Clean the accessories and the inside of the appliance with warm water and bicarbonate of soda (5 ml to 0.5 litres of water). Do not use any abrasive cleaners as these can damage the surfaces.

3

Location

Ensure the appliance is situated in a well-ventilated room, away from heat sources such as radiators or boilers. The ambient temperature should be between 10 °C and 32 °C for optimal performance.

View the rest of the steps

Icy Cool Performer

The Zanussi - Electrolux ZRD 1845 keeps your veggies fresh and your ice cream icy with its dual compartment magic. It's like having the North Pole in your kitchen!

Energy Saver Extraordinaire

With an energy consumption of just 0.721 kWh/24h, this fridge-freezer combo helps you save on electricity bills while keeping your groceries fresh. It's a win-win!

Troubleshooting

The Zanussi ZRD 1845 Refrigerator has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your Zanussi might be giving you.

No power to the appliance

The appliance is not receiving power. This could be due to a power outage, a blown fuse, or an unplugged power cord. Ensure that the appliance is plugged in. Check if there is power at the socket by testing it with another device. Verify that there is no power cut by examining other electrical devices in the home. Replace any blown fuses.

The temperature in the fridge or freezer is too high

The appliance is not cooling as expected, which may be due to an incorrect thermostat setting, an open door, or an unsuitable location. Check the thermostat setting and adjust it to a cooler setting if necessary. Ensure that the door is closed properly and that the appliance is placed in a location within its operating temperature range of 10°C to 32°C.

The compressor runs continuously

The compressor is operating without stopping, which can occur if the thermostat is set too low or the door is not closed properly. Increase the thermostat setting to a higher temperature. Make sure the door is closing fully and the door gasket is clean and intact.

More Troubleshooting

Model and Specifications

The Zanussi Electrolux ZRD 1845 refrigerator features a gross capacity of 180 liters, with a freezer capacity of 42 liters and a refrigerator capacity of 138 liters. The energy consumption is 0.721 kWh per 24 hours, equating to 263 kWh per year, earning it an A energy class rating.

Operating Environment

The refrigerator is designed to operate in ambient temperatures between 10°C and 32°C. Operating outside this range may affect performance and cause food spoilage.

Safety Precautions

Avoid using mechanical devices to accelerate defrosting and do not use electrical appliances inside the storage compartments. Ensure the appliance is stable, and the door gaskets are intact and clean.

Defrosting

Do not use mechanical aids for defrosting. Once defrosting is complete, dry the interior thoroughly and reconnect the appliance to the mains, setting the thermostat to the maximum for at least two hours.

Service and Spare Parts

For servicing and genuine spare parts, contact your local Service Force Centre with your model and serial number. Ensure the appliance is serviced by authorized personnel.

Installation and Transportation

The appliance and its interior fittings are protected for transport. Remove all packaging and adhesive tape carefully. The appliance should not be switched on for 2 hours after transportation to allow the refrigerant to settle.

Starting the Appliance

After installation, allow the appliance to stand for 2 hours, plug it in, and switch it on at the mains supply. Adjust the thermostat to the desired setting, typically between 3 and 4 for normal operation.

Cleaning and Maintenance

Regularly clean the appliance with warm water and bicarbonate of soda. Disconnect from the electrical supply before cleaning. Dust the condenser and compressor with a brush or vacuum cleaner to maintain efficiency.

Energy Saving Advice

To save energy, do not place hot food directly into the refrigerator and ensure the door is closed properly. Dust accumulation on the condenser can increase energy consumption.

Warranty and Customer Support

The appliance comes with a 12-month warranty covering defects due to faulty workmanship or materials. For inquiries, contact Zanussi Electrolux Customer Care with your appliance details.

Maintenance

Check out our tips to prevent many common issues and extend the life of your Zanussi Refrigerator.

Ensure Proper Door Closure

Check that nothing is obstructing the door from closing properly. Ensure the door gasket is clean and intact to maintain an effective seal.

Appliance Stability

Verify that the refrigerator stands stable on the floor to prevent operational issues.

External Cleaning

Wash the outer cabinet with warm soapy water. Clean the condenser and compressor at the back with a brush or vacuum cleaner once or twice a year to enhance performance and reduce electricity consumption.

Internal Cleaning

Before cleaning the inside, switch off the appliance and disconnect it from the electrical supply. Use warm water and bicarbonate of soda for cleaning. Avoid using sharp metal tools to scrape off frost.

Defrosting

Perform complete defrosting once or twice a year by switching off the appliance and letting the ice melt naturally. Dry the interior thoroughly before reconnecting to the mains.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

Dimensions and Capacity

  • Gross capacity (liters): Refrigerator: 138, Freezer: 42
  • Net capacity (liters): Refrigerator: 136, Freezer: 42
  • Width (mm): 496
  • Height (mm): 1209
  • Depth (mm): 604
  • Weight (kg): 42

Energy and Performance

  • Energy consumption (kWh/24h): 0.721
  • Energy consumption (kWh/year): 263
  • Energy class: A
  • Freezing capacity (kg/24h): 3
  • Rising time (h): 17
  • Rated power (W): 75

Design and Features

  • Number of compressors: 1
  • Climate classification: SN
  • Ambient temperature range (°C): +10 to +32

Zanussi - Electrolux ZRD 1845: A Practical Fridge Freezer Solution

The Zanussi - Electrolux ZRD 1845 fridge freezer is a refined blend of functionality and modern design, crafted to meet the demands of the contemporary household. With a sophisticated energy class rating of A, this appliance ensures energy efficiency without compromising on performance. The unit offers a generous net capacity with 136 liters in the refrigerator and 42 liters in the freezer, providing ample space for your fresh and frozen goods. Its dimensions are designed to fit seamlessly into your kitchen space, standing at 1209 mm in height, 496 mm in width, and 604 mm in depth. The ZRD 1845 excels in maintaining optimal food storage conditions with a climate classification suited for temperatures ranging from 10°C to 32°C. The single compressor ensures consistent cooling, while the manual defrost feature keeps the appliance running smoothly. Whether you're freezing fresh produce or storing leftovers, this fridge freezer is engineered to support a variety of food preservation needs efficiently.